Job Flow Procedure
223
Job Flow Sheets
8
Step 3 Confirming/Changing the Job Flow Sheet
1
Select a job flow sheet.
2 To see the details, select [Details].
To change the settings, select
[Change Settings].
For information on checking/changing job
flow settings, refer to "Selecting/Changing
a Job Flow Sheet" (P.224).
Step 4 Starting the Job Flow Sheet
1
Load the originals.
Note • A job flow sheet with application linkage does not require loading documents.
2 Press the <Start> button.
Note • After you press the <Start> button, the following message may appear on the screen.
"Unable to start. The selected Job Flow Sheet contains incomplete settings."
This message appears if you set [Passcode Entry from Control Panel] to [On] when creating
a job flow sheet on a computer. Change this setting to [Off] to clear the problem.
To Next Page
Loading...
