Fuji Xerox DocuCentre-II 3005

11 System Settings
306
System Settings
11
For information on the certificate, refer to the Network Administrator Guide.
S/MIME Communication
Select whether to enable or disable the S/MIME communication.
Receive Untrusted E-mail
If you select [Off], the machine does not receive the following e-mail:
z
E-mail other than e-mail sent by S/MIME when [S/MIME Communication] is activated.
z
E-mail that fails to attach a signature or verification.
z
E-mail that is attached with an expired certificate.
Receive Untrusted iFax
If you select [Off], the machine does not receive the following iFax:
z
iFax other than iFax sent by S/MIME when [S/MIME Communication] is activated.
z
iFax that fails to attach a signature or verification.
z
iFax that is attached with an expired certificate.
Message Digest Algorithm
Select a message digest algorithm. Two algorithms are available: SHA1 and MD5.
Contents Encryption Method
Set the encryption method for mail contents. Four methods are available: 3DES, RC2-40,
RC2-64, and RC2-128.
Digital Signature - Outgoing E-mail
Select whether or not to always add a digital signature to e-mail. You can also select the
setting in which the machine asks to add a digital signature to the e-mail whenever you send.
Digital Signature - Outgoing iFax
Select whether or not to always add a digital signature to iFax. You can also select the setting
in which the machine asks to add a digital signature to the iFax whenever you send.
Certificate Auto Store
Select whether or not to automatically store a S/MIME certificate attached with the e-mail
when receiving e-mail sent from an address registered in the address book.
PDF/DocuWorks Signature Settings
Allows you to make the settings for security and signature of PDF/DocuWorks documents.
Device Certificate
Select a certificate to be linked.
For information on the certificate, refer to the Network Administrator Guide.
PDF Signature
Select the setting for PDF Signature from [Do not add signature], [Always add visible
signature], [Always add invisible signature], and [Select during send].
DocuWorks Signature
Select the setting for DocuWorks Signature from [Do not add signature], [Always add
signature], and [Select during send].
Other Settings
In [Other Settings], you can set the following items.
For information on other settings, refer to the Network Administrator Guide.
E-mail Receive Protocol
Select from [SMTP] and [POP3] depending on the usage environment.