11 System Settings
274
System Settings
11
Common Settings
In [Common Settings], you can make settings relating to the machine’s common
features. The following shows the reference section for each item.
Machine Clock/Timers..............................................................................................................274
Audio Tones..............................................................................................................................276
Screen/Button Settings..............................................................................................................278
Paper Tray Settings ...................................................................................................................279
Watermark.................................................................................................................................281
Image Quality............................................................................................................................281
Reports ......................................................................................................................................282
Maintenance..............................................................................................................................284
Other Settings............................................................................................................................284
1 On the [System Settings] screen, select [System Settings].
For the method of displaying the [System Settings] screen, refer to System Settings Procedure (P.258).
2 Select [Common Settings].
3 Select the item to be set or changed.
Machine Clock/Timers
You can set the clock time, or the time intervals until the power saver or reset features
take effect.
Date
Set the date in the system clock of the machine. The date set here is printed on lists and
reports.
1 Select [Date], and select [Change
Settings].
2 Select the date format.
3 Select Year/Month/Day.
Time
Set the time in the system clock of the machine, using 12-hour or 24-hour format.
The time set here is printed on lists and reports.
1 Select [Time], and select [Change
Settings].
2 Select the display format.
3 When [12-Hour Clock] is selected,
select [AM] or [PM].
4 Set the hours and minutes.