Printing/Deleting Documents in the Mailbox
209
Send from Mailbox
6
• If a different size document is included in multiple documents, it may be printed in improper
orientation.
• [Batch Print] is not available while interrupting another job.
• [Batch Print] is not available for the fax/iFax documents that are processed using the [Private
Mailbox], [Fax to Mailbox], or [iFax to Mailbox] feature.
îš„Quantity
Allows you to change the quantity.
îš„Paper Supply
Allows you to select paper.
Note • When printing the fax document for Private Polling and Fax to Mailbox, if [Tray Mode] in
[Receive Paper Size] is selected, the document will be printed automatically on the paper
loaded on the bypass tray in case the specified paper tray cannot be used. For information
on [Receive Paper Size] settings, refer to "Receiving Paper Size" (P.321)
îš„2 Sided Printing
Allows you to set 2-sided printing.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
îš„Output
Allows you to set stapling and output trays.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
The following tables show the stapling positions when you select [1 Staple] for print
documents (by specifying [Save to Mailbox] on a print driver) and when you select [1
Staple] for scanned documents.
z
For documents in a mailbox stored by specifying [Save to Mailbox] on a print driver
Original
Stapling
Position
Report
Report
Report
Report
To Next Page
Loading...
Need help?
General
