13 Machine Status
390
Machine Status
13
îš„ESC/P Settings List
Prints the settings configured in the ESC/P emulation mode.
îš„ESC/P Stored Programming List
Prints the stored programming settings configured in the ESC/P emulation mode.
îš„ESC/P User Defined List
Prints the information on forms, logos, and patterns that can be used in the ESC/P
emulation mode.
îš„Fonts List
Prints the list of fonts available on the machine.
Note • Printed information depends on the installed options.
îš„PS Logical Printers List
Prints the list of logical printers created in PostScript.
PostScript logical printers are configured on CentreWare Internet Services. For more information, refer
to the online help of CentreWare Internet Services.
îš„PostScript Fonts List
Prints the fonts available in PostScript.
îš„HP-GL/2 Settings List
Prints the settings for the HP-GL, HP-GL/2 and HP-RTL emulation modes.
îš„HP-GL/2 Stored Programming List
Prints the stored programming settings for the HP-GL, HP-GL/2, and HP-RTL
emulation modes.
îš„PCL Settings List
Prints the settings for the PCL virtual printer.
îš„PCL Macro List
Prints the list of forms registered for PCL.
îš„PCL Fonts List
Prints the fonts available in PCL.
Scan Mode Settings
1 Select [Scan Mode Settings].
Note • To display the [Scan Mode
Settings] screen, select the
<Machine Status> button, and
then select [Billing Meter/Print
Report] > [Print Report/List] >
[Scan Mode Settings].
2 Select the list to be printed.
3 Press the <Start> button.
To Next Page
Loading...
Need help?
General
