16 Problem Solving
522
Problem Solving
16
3 Lift up the lever on the upper right
side of the cover A, and open the
cover A.
4 If paper is jammed at the Fuser
Unit, push down the green lever A2
in the direction of the arrow to open
the Fuser Unit cover.
5 If paper is jammed inside the Fuser
Unit, gently remove the paper while
holding down the green lever A2.
Note • If the paper is torn, check for
any torn pieces inside the
machine.
6 Push the center section of the
cover A to firmly close it.
7 Close the Tray 5 (bypass).
To Next Page
Loading...
