Fuji Xerox DocuCentre-II 3005 User Manual

Specifications
545
Appendix
17
Document Feeder Specifications
B-Finisher Specifications
Document feeder type Duplex automatic document feeder
Document size/type Maximum: 297mm×432mm (A3, 11×17"), 297×600mm
*
Minimum : 139.7×210mm (A5, 5.5x8.5")
* When using the fax feature. Only one set is available for a long
document of more than 432 mm. The paper type of the document is 60
- 128g/m
2
.
38 - 128g/m
2
(2-sided: 50 - 128g/m
2
)
Number of originals held 75 sheets
Important • When using Xerox P paper
Original changing speed <DocuCentre-II 3005>
Copy : 34.6 sheets/minute (A4 1-sided)
Scan/Fax : 50 sheets/minute (A4 1-sided)*
<DocuCentre-II 2055/2005>
Copy : 29 sheets/minute (A4 1-sided)
Scan/Fax : 50 sheets/minute (A4 1-sided)*
* For fax, this value is based on when [Rotate 90 Degrees] is set
to [No] and [Resolution] is set to [Standard] or [Fine].
Dimensions/Weight Width 560.0 × Depth 517.0 × Height 123.0mm, 10.0kg
Tray type Finisher tray × 1: Collate (offset stacking available)/ Stack (offset
stacking available)
Paper size/Supported
paper
Maximum: A3, 11x17", Minimum: B5
64 - 105g/m
2
Tray capacity A4: 1,000 sheets, B4 or larger: 500 sheets, Mixed stack*: 300
sheets
* Larger size paper is stacked on top of smaller size paper.
Important • When using Xerox P paper
Staple Maximum stapled sheets:50 sheets (64g/m
2
or less)
Paper size : Maximum A3, 11x17" / Minimum B5
Stapling position : 1 place (front/back, angled stapling),
2 places (parallel stapling)
Important • When using Xerox P paper
Dimensions/Weight Width 566 × Depth 584 × Height 940mm, 30kg
Space requirements
(when connected to the
main unit)
Width 2,140 × Depth 1,180mm (main unit + B-Finisher)

Fuji Xerox DocuCentre-II 3005 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-II 3005
Category	All in One Printer
Language	English