EasyManuals Logo

Fuji Xerox DocuCentre-II 3005 User Manual

Fuji Xerox DocuCentre-II 3005
615 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #564 background imageLoading...
Page #564 background image
17 Appendix
562
Appendix
17
Layout 405 Sets the layout for printing.
Note • This item can be set when [PDF Bridge] is selected for [Print
Processing Mode].
[0] (Default) : Auto %
[1] : Booklet
[2] : 2-up
[3] : 4-up
[4] : 100% (size-by-size)
The [Auto %] setting automatically calculates the largest magnification
possible to fit to the output paper size. It automatically selects A4 or letter
size paper based on the size of the original PDF file.
The [Booklet] setting prints the images side by side, on both sides of each
page, in the correct order to make a booklet. Some documents may not
be printed in a booklet fashion depending on the structure of their pages.
In such case, they will be printed with the [Auto %] setting.
Note • If the 2-sided feature is unsupported, documents are printed on one
side of paper.
• When [A4] is selected for [Paper Size], documents will be printed on
A4 size paper.
• When [Paper Size] is set to [Auto], documents will be printed on A3
or A4 size paper.
The 2-up setting prints two pages onto one sheet of paper. When 2 Up is
selected, the paper size is fixed at A4.
The 4-up setting prints four pages on each sheet of paper. When 4 Up is
selected, the paper size is fixed at A4.
Paper Size 406 Set the size of the paper to be printed.
[0] (Default) : Auto
[1] : A4
The [Auto] setting automatically determines the paper size, based on the
size of a PDF file to be printed and the settings configured for it.
Print Processing
Mode
408 Sets the print processing mode when using the PDF Direct Print feature.
[0] (Default) : PDF Bridge
[1] : PS
[PDF Bridge] processes PDF files using the PDF Direct Print feature
provided by Fuji Xerox.
[PS] processes PDF files using the PostScript feature provided by Adobe.
Note • This item appears only when the optional Adobe PostScript 3
kit is installed.
• The print results may be different between the [PDF Bridge] and [PS]
selections.
• When [PS] is selected, the [Layout] setting becomes invalid.
Setting Item
Item
Number
Value

Table of Contents

Other manuals for Fuji Xerox DocuCentre-II 3005

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuCentre-II 3005 and is the answer not in the manual?

Fuji Xerox DocuCentre-II 3005 Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuCentre-II 3005
CategoryAll in One Printer
LanguageEnglish

Related product manuals