5 Tools
144
Tools
5
îš„Print when delivery fails
Prints a Transmission Report - Job Undelivered when the data transmission failed.
Scan File Transfer Report (Fax Server)
Set whether to print a Transmission Report after scanned data is sent using the Server Fax
feature.
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
îš„No Report
Does not print a report regardless of whether data transmission is successfully completed or
not.
îš„Print Report
Automatically prints a Transmission Report for a successful transmission and a Transmission
Report (undelivered) for a transmission failure.
îš„Print when delivery fails
Prints a Transmission Report (undelivered) for a transmission failure.
2 Sided Report
Select whether or not to print a report on one side of the paper or both sides when printing a
report/list.
Activity Report - Recipient
Select how the information on recipients is shown when printing an Activity Report: the first
40 characters or the last 40 characters.
Job Flow Error Report
Select whether or not to automatically print a Job Flow Error Report.
Maintenance
You can initialize or delete data from the hard disk of the machine.
Initialize Hard Disk
Initializes the hard disk.
Data deleted by initialization includes supplementary fonts, ESC/P, and HP-GL/2 forms.
Note • The secure print documents and logs are not erased.
Delete All Data
This feature is designed to prevent the leakage of confidential information of a customer
when the machine is returned to Fuji Xerox. By executing [Start], all data registered on the
machine is deleted.
Do not use this feature normally.
Software Options
This feature is for service representative use. For more information, contact our Customer
Support Center.
Finisher Adjustment
This feature is displayed only when the Finisher-B1 (optional), the Booklet Maker Unit for
Finisher-B1 (optional), or the Hole Punch Unit (optional) is installed.
To Next Page
Loading...
Need help?
General
