5 Tools
248
Tools
5
This feature also restricts the submission of print jobs from a computer via a network.
To use the Authentication feature, authentication information such as a user ID and passcode
needs to be entered in a print driver.
If authentication fails, the print data sent to the machine is saved in the machine or deleted
according to the Charge Print settings.
For information on how to set the login type, refer to "Login Type" (P.246).
îš„Feature Access
Set [Color Copying].
When a user is authenticated using remote authentication with Kerberos, LDAP, or SMB
authentication system and the access control is enabled, the user can access features on the
control panel of the machine, which are determined based on the access permission
information obtained from the LDAP server.
Important • When the access control is enabled, set [Save remote accounts in this machine] to
[Disabled] in [User Details Setup] because the access permission information of the control
panel obtained via remote authentication is not saved on the machine. For information on
the setting, refer to "Save remote accounts in this machine" (P.249).
Create/View User Accounts
To enable the Accounting feature, register user IDs and user names to authenticate
registered users.
You can set a limit on the number of pages for each user of the machine. You can also
check the cumulative number of pages for each user registered. Up to 1,000 user data
can be registered. The settings described here are identical with [Create/View User
Accounts] under [Accounting].
Refer to "Create/View User Accounts" (P.236).
Reset User Accounts
You can delete all registered information for all registered users in a single operation,
or reset the auditron data. It is also available to print contents for confirmation before
resetting. The settings described here are identical with [Reset User Accounts] under
[Accounting].
Refer to "Reset User Accounts" (P.239).
Create Authorization Groups
System administrators can give login users authority to use some features that are
restricted for login users. The login users can be divided into different authorization
groups.
Note • Up to 20 groups can be registered.
1 Select [Create Authorization Groups].
2 Select [Group Name], and then select
[Create/Delete].
3 Select and set any item.
îš„Group Name
Enter a group name with up to 32 single-byte
characters.
îš„Restrict Recipient Selection Method
Select whether or not to remove restriction when a transmission to a recipient who is not
registered on the Address Book is restricted for the Fax/Internet Fax or Scan feature.
To Next Page
Loading...
Need help?
General
