EasyManua.ls Logo

Fuji Xerox DocuCentre-IV C2260

Fuji Xerox DocuCentre-IV C2260
617 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14 Problem Solving
418
Problem Solving
14
Error Code
This section describes error codes.
An error message and error code (∗∗∗-∗∗∗) are displayed if printing terminated
abnormally because of an error, or a malfunction occurred in the machine.
For faxing, an error code is also displayed on an Activity Report and a Transmission
Report - Job Undelivered.
Refer to the error codes in the following table to resolve problems.
Important • If an error code is displayed, any print data remaining in the machine and information stored
in the machine's memory is not secured.
If an error code is displayed that is not listed in the following table, or if you cannot
resolve an error despite following the instructions described in the table, contact our
Customer Support Center. The contact number is printed on the label or card attached
to the machine.
Errors are categorized as follows.
C: Copy
P: Print
F: Fax
S: Scan
M: Mail
O: Others
Error Code
Category
Cause and Remedy
CPFSMO
002-770
O O [Cause] Unable to process the job template because of insufficient
hard disk space.
[Remedy] Delete unnecessary data from the hard disk to free up disk
space.
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.

Table of Contents

Other manuals for Fuji Xerox DocuCentre-IV C2260

Related product manuals