Changing the Paper Size
47
Paper and Other Media
2
4 Load and align the edge of the paper against
the left side of the tray, with the side to be
copied or printed on facing up.
Important • Do not load paper above the maximum fill
line.
5 While pinching the two paper guides, lightly
align the edges to the edge of the paper.
Note • When loading standard size paper in the
Tray, move the paper guides to the marks
corresponding to the paper size.
6 Push the tray in gently until it stops.
Important • When inserting the tray, push it gently. Forcibly pushing in the tray may cause machine
malfunction.
Note • Affix the paper size label to the front of the paper tray.
For more information on paper type settings, refer to
"Changing the Paper Settings" (P.49).
When the Envelope Tray (Optional) is Installed
The following describes how to change the envelope size in the Envelope Tray
(optional).
1 Pull out the Envelope Tray until it stops.
Important • While the machine is processing a job, do
not pull out the tray that is being used for
a job.
• To prevent paper jams or erroneous
detection of loaded envelopes in the
Envelope Tray by the machine, do not
add envelopes on top of any remaining
envelopes in the tray.
2 Remove any envelopes loaded in the tray.
3 While pinching the two paper guides, move
them to the edges of the tray.
To Next Page
Loading...
Need help?
General
