5 Tools
170
Tools
5
• You can configure the E-mail Notification Service in CentreWare Internet Services. For more
information, refer to the help of CentreWare Internet Services.
UPnP Discovery
Port Status
Select [Enabled] to use UPnP.
Port Number
Enter a port number for UPnP communication from 1 to 65535.
The default value is 80.
Important • Do not use the numbers assigned to the other ports.
WSD
Port Status
Select [Enabled] to use UPnP.
Set this when you search a device on a network from Windows Vista and Windows 7.
Port Number
Enter a port number from 1 to 65535.
The default value is 80.
Important • Do not use the numbers assigned to the other ports.
Note • WSD stands for Web Services on Devices.
Internet Services (HTTP)
Port Status
Select [Enabled] to use CentreWare Internet Services.
For more information about CentreWare Internet Services, refer to "CentreWare Internet Services
Settings" (P.255).
Port Number
Enter a port number for the Internet Services from 1 to 65535.
The default value is 80.
Important • Do not use the numbers assigned to the other ports.
Note • You cannot select [Port Number], if HTTP port is disabled.
To configure [Port Number], enable port status and reboot the machine, and then configure
[Port Number].
SOAP
Port Status
Select [Enabled] when you use an application program such as EasyOperator.
Port Number
Enter a port number for SOAP from 1 to 65535.
The default value is 80.
Important • Do not use the numbers assigned to the other ports.
WebDAV
Port Status
Select [Enabled] when you use an application program such as EasyOperator and Network
Scanner Utility3 to access folders in the machine.
Note • You cannot select [Port Number] and [Operation Time-Out], if WebDAV port is disabled.
To configure [Port Number] and [Operation Time-Out], enable port status and reboot the
machine, and then configure [Port Number] and [Operation Time-Out].
Port Number
Enter a port number for WebDAV from 1 to 65535.
The default value is 80.