EasyManuals Logo

Fuji Xerox DocuCentre-IV C2260 Administrator's Guide

Fuji Xerox DocuCentre-IV C2260
617 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
Energy Saver Mode
19
Before Using the Machine
1
Energy Saver Mode
The machine is equipped with the Energy Saver mode that reduces the power
consumption by saving the electricity to the machine when no copy or print data is
received for a specified time.
The Energy Saver has two modes: the Low Power mode and the Sleep mode.
When you press the <Energy Saver> button or do not use the machine for a specified
period of time, the machine enters the Low Power mode.
When time exceeds the time specified in the Low Power mode, the machine then
enters the Sleep mode.
It extinguishes the touch screen and lights up the <Energy Saver> button on the control
panel. To activate the machine, press the <Energy Saver> button. Pressing the
<Energy Saver> button extinguishes the light and deactivates the Energy Saver mode.
Note • When the following device is connected to the machine and a user performs the following
operation, the Low Power mode can be deactivated without pressing the <Energy Saver>
button. If the machine is in the Sleep mode, however, the Sleep mode will not be deactivated
by the following operation. Set the time long to elapse until the machine enters the Sleep
mode.
- Touch the card to IC Card Reader (purchase separately)
• When the machine is in the Authentication mode, the Authentication mode is exited once the
machine enters the Low Power mode.
Low Power Mode
The Low Power mode reduces the power to the control panel and the fuser unit.
Sleep Mode
The Sleep mode reduces the power to the machine even more than the Low Power
mode.
It takes longer time than the Low Power mode to deactivate the Sleep mode and enable
to use the machine.
Changing the Interval for Entering Energy Saver Mode
This section describes the procedures for setting the Energy Saver mode.
To activate the Energy Saver, set the time to elapse until the machine enters the Low
Power mode as well as the time to elapse until the machine enters the Sleep mode.
Note • You can set the time to elapse until the machine enters the Low Power mode and the Sleep
mode from 1 to 240 minutes in 1 minute increments.
1 Press the <Log In/Out> button.
123
456
789
0#
C
<Log In/Out> button

Table of Contents

Other manuals for Fuji Xerox DocuCentre-IV C2260

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuCentre-IV C2260 and is the answer not in the manual?

Fuji Xerox DocuCentre-IV C2260 Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuCentre-IV C2260
CategoryAll in One Printer
LanguageEnglish

Related product manuals