Installing the Extension System Memory (2 GB) (Optional)
599
Appendix
15
Installing the Extension System Memory (2 GB) (Optional)
The machine comes with 1G system memory. If you want to increase the system
memory, replace the standard 1 GB memory card with the Extension System Memory
(2 GB) (optional) as the machine has one slot for installing a memory card.
This section describes how to install the Extension System Memory (2 GB) to the
machine.
1 Switch off the power, and then switch off the main power.
For information on how to switch off the power and the main power, refer to "2 Product Overview" >
"Power Source" in the User Guide.
2 Unplug the power cord from the power
outlet.
3 Loosen the two screws that secure the rear
left cover to the machine.
Important • Do not remove the screws, just loosen
them.
4 Open the rear right cover.
To Next Page
Loading...
Need help?
General
