15 Appendix
600
Appendix
15
5 Remove the memory card already inserted.
Push the retaining clips on both ends in the
outward direction and pull the memory card
straight out.
Important • When removing the memory card, be
careful not to drop the card.
6 Insert a new memory card straight into the
slot.
Note • Push the memory card as far as it can go
to secure it.
• When the memory card is installed
correctly, the retaining clips on both ends
will snap into the locked position.
7 Close the rear right cover.
8 Tighten the two screws loosened in step 3.
9 Plug the power cord into the power outlet.
10 Switch on the main power, and then switch on the power.
For information on how to switch on the power and the main power, refer to "2 Product Overview" >
"Power Source" in the User Guide.
To Next Page
Loading...
Need help?
General
