5 Tools
226
Tools
5
Name, Server, Shared Name, Save in, User Name, and Password
Select [Name], [Server], [Shared Name], [Save in], [User Name], or [Password] to display an
input screen.
The numbers of characters you can input are as follows:
z
Name: Up to 36 single-byte characters
z
Server: Up to 64 single-byte characters
z
Shared Name: Up to 64 single-byte characters
z
Save in: Up to 128 single-byte characters
z
User Name:
For domain users: up to 97 characters with the format of “user name@domain name” or
“domain name\user name”
(user name and domain name must be up to 32 and 64 single-byte characters, respectively)
For local users: up to 32 single-byte characters
z
Password: Up to 32 single-byte characters
Print
Configure print settings. When [On] is selected, you can configure the settings for the Print
feature.
Print Quantity
Set the number of copy sets from 1 to 999 in 1 set increments.
Paper Supply
Select a paper tray for printing. When [Auto Select] is selected, the same paper size as the
document size is used.
z
Auto Select
A suitable paper tray is automatically selected.
z
Trays 1 to 4
Select paper from four trays.
z
Bypass
Prints on paper loaded in Tray 5.
2 Sided Printing
Set the 2 sided printing option.
Output
Configure the stapling, hole punch, and output destination settings.
z
Staple
Set the position for stapling.
z
Hole Punch
Set the position for punching.
z
Output Destination
Set the output destination.
E-mail Notification
You can receive an e-mail notification when a file is saved in a folder or a job flow ends.
Name/E-mail Address
Set the recipient of the e-mail notification.
Message
Enter a message that is displayed in the e-mail message body.
When to Notify
Select the e-mail notification timing from [When file is stored] and [When Job Flow ended].
To Next Page
Loading...
Need help?
General
