14 Problem Solving
384
Problem Solving
14
White areas or
white or colored
stripes appear.
The machine interior (laser
scanners) may be soiled.
Clean the machine interior.
Refer to "Cleaning the Interior (Laser
Scanners)" (P.81).
The paper is damp. Replace the paper with new one.
Refer to "Loading Paper" (P.42).
The paper is unsuitable. Load suitable paper.
Refer to "Loading Paper" (P.42).
The entire output
is faint.
When Tray 5 is used, the
size and type of the loaded
paper are different from the
settings on the print driver.
Load paper of the correct type and size
into Tray 5.
Refer to "Loading Paper in Tray 5" (P.44).
Two or more sheets may be
fed simultaneously.
Fan the paper well and load it again.
Refer to "Loading Paper" (P.42).
Paper becomes
wrinkled.
The paper is unsuitable. Replace the paper with new one.
Refer to "Loading Paper" (P.42).
Paper has been added to
the paper loaded.
The paper is damp.
Text is blurred. The paper is unsuitable. Replace the paper with new one.
Refer to "Loading Paper" (P.42).
Paper has been added to
the paper loaded.
The paper is damp.
White or color
patches appear
vertically.
The drum cartridge has
deteriorated or is damaged.
Replace the drum cartridge with a new
one.
Refer to "Replacing Drum Cartridges R1, R2,
R3, or R4" (P.61).
No toner remains in the
toner cartridge.
Replace the toner cartridge with a new
one.
Refer to "Replacing Toner Cartridges" (P.56).
The machine interior (laser
scanners) may be soiled.
Clean the interior.
Refer to "Cleaning the Interior (Laser
Scanners)" (P.81).
Symptom Cause Remedy
Paper feed direction
To Next Page
Loading...
Need help?
General
