Loading Paper
45
Paper and Other Media
2
1 Open Tray 5.
Note • If necessary, pull out the extension tray.
The extension tray can be extended in
two stages. Pull out the extension tray
gently.
2 Load paper with the side to be copied or
printed on facing down, inserting the paper
until its edge lightly touches against the
paper feed entrance.
Important • Do not load mixed paper types into the
tray.
• Do not load paper above the maximum fill
line. It may cause paper jams or machine
malfunction.
• When making copies or prints on thick-
stock paper and the paper will not feed
into the machine, apply a curl to the paper
as shown in the figure on the right. Note,
however, that excessively bending or
folding the paper may cause paper jams.
• Depending on the type of the
heavyweight paper, paper may not be fed
to the machine or image quality may
deteriorate.
3 Adjust the paper guides to align the edges of
the paper loaded.
4 Instruct a copy or print job.
To Next Page
Loading...
