EasyManua.ls Logo

Fuji Xerox DocuCentre-IV C2260 - Page 479

Fuji Xerox DocuCentre-IV C2260
617 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Error Code
477
Problem Solving
14
033-516
O [Cause] An error occurred during fax transmission.
[Remedy] Confirm the recipient, and then execute the operation
again. If receiving, ask the sender to send again.
033-517
O [Cause] An error occurred during fax transmission.
[Remedy] Execute the operation again. If the error still is not
resolved, confirm the condition of the other machine.
033-518
O [Cause] The other machine cannot correspond to reception of
SUB.
[Remedy] Check whether the other machine can correspond to
reception of SUB, and execute the operation again.
033-519
O [Cause] The other machine cannot correspond to reception of
SEP.
[Remedy] Check whether the other machine can correspond to
reception of SEP, and execute the operation again.
033-520
O [Cause] The other machine cannot correspond to reception of
PWD/SID.
[Remedy] Check whether the other machine can correspond to
reception of PWD/SID, and execute the operation again.
033-521
O [Cause] An error occurred during fax transmission.
[Remedy] Confirm the condition of the machine (memory is full,
paper has run out, or other conditions), and execute the
operation again.
033-522
O [Cause] An error occurred during fax transmission.
[Remedy] Ask the sender to execute the operation again.
033-523
O [Cause] The line (Channel 1) is not connected correctly.
[Remedy] Confirm the connection of the line (Channel 1) and
connect it correctly, and then execute the operation again.
033-524
O [Cause] The line (Channel 2) is not connected correctly.
[Remedy] Confirm the connection of the line (Channel 2) and
connect it correctly, and then execute the operation again.
033-525
O [Cause] The line (Channel 3) is not connected correctly.
[Remedy] Confirm the connection of the line (Channel 3) and
connect it correctly, and then execute the operation again.
033-526
O [Cause] An error occurred during fax transmission.
[Remedy] Confirm the model of the sender’s machine, and then
execute the operation again. If receiving, ask the sender to
send again.
033-527
O [Cause] An error occurred during fax transmission.
[Remedy] Confirm the other machine has a problem, and then
execute the operation again.
033-528
O [Cause] An error occurred during fax transmission.
[Remedy] Ask the sender to send again.
033-529
O [Cause] An error occurred during fax transmission.
[Remedy] Confirm the other machine has a problem, and then
execute the operation again.
Error Code
Category
Cause and Remedy
CPFSMO
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.

Table of Contents

Other manuals for Fuji Xerox DocuCentre-IV C2260

Related product manuals