15 Appendix
568
Appendix
15
îš„Printed Time in Force Annotation
The time you specified to print a job, the time at which the print job is started inside the
machine, and the time at which the job is actually printed may not be coincident with
one another depending on the machine status and settings or the content of the print
job. The time printed in Force Annotation is the time at which the print job is started
inside the machine.
îš„Stored Programming
z
The following features and operations cannot be registered on a stored program.
- Registration and call of a stored program
- System Settings
- The [Media Print - Text] and [Media Print - Photos] buttons on the [Services Home]
screen
- The [Store to USB] button on the [Services Home] screen
- [Network Scanning] and [Job Flow Sheets] buttons on the [Services Home] screen
- A <Custom> button to which the Network Scanning or Job Flow service is
assigned
- Address Book for the Fax/Internet Fax, E-mail, and Scan to PC services
- Buttons that cannot be selected
- The [Language] button on the [Services Home] screen
- The [Screen Brightness] button on the [Services Home] screen
- The use of a scrolling bar when you select an item
- The [Browse] button of the Scan to PC service
- Address editing operation of the E-mail service ([Remove], [Edit], and [Close
Menu] on the pop-up menu)
- The <Energy Saver> button
z
After registering a program, you may not be able to retrieve the stored program
correctly if you execute the following operations:
- If a Watermark is registered on the program, and you change the default value of
the Watermark after registering the program
- If a passcode of a folder that is subject to operation by a stored program is
changed after the program is registered
- If the settings of the control panel are changed
- If the features registered on the <Custom> buttons are changed
- If the setting is changed with [Tools] > [System Settings] > [Copy Service Settings]
> [Preset Buttons]
- If the program is selected from a list of a job flow or the Address Book
- If a button no longer functions as a result of a change of optional components such
as Finisher
- If the measurement unit such as mm or inch is changed
- If a file is selected from a file list with Job Status
îš„Output Color
When you select [Auto Detect] in [Output Color] for a copy job or select [Color] in
[Output Color] for a print job, the machine may consume yellow, magenta, and cyan
toner cartridges and drum cartridges even when your document is black and white.
In addition, when [Background Suppression (Color Copy)] is set to [High Speed] under
[Tools] > [Common Service Settings] > [Image Quality Adjustment], yellow, magenta,
and cyan toner cartridges and drum cartridges are always used. Thus these color toner
cartridges and drum cartridges are consumed even when your document is black and
white.
To Next Page
Loading...
Need help?
General
