15 Appendix
570
Appendix
15
îš„When the Print Results Differ from the Settings
As in the following cases, insufficient memory for the print page buffer may cause print
result in not printing as specified. In this case, we recommend that you increase the
memory.
z
Printed only on 1 side when 2 sided printing is specified.
z
A job was terminated (If data cannot be written to the print page buffer, the job
including that page is terminated).
îš„Direct Print via USB Host (a USB memory device/the Memory Card Reader)
When the machine is in the Sleep mode, your computer does not detect the machine
if you connect a USB memory device or the Memory Card Reader to the machine. Exit
the Sleep mode, and then connect the USB memory device or the Memory Card
Reader and send a print job.
îš„Direct Print from CentreWare Internet Services
To print files directly from CentreWare Internet Services, the HDD Extension Kit
(optional) is required. Printing files using ContentsBridge, however, does not require
the HDD Extension Kit (optional).
îš„Printing from a USB Memory Device
z
To print from a USB memory device, the USB Media Print Kit (optional) is required.
z
You can use a USB host adapter to print from your USB memory device or via your
USB cable (as necessary), but the operation is not guaranteed.
z
Use USB 2.0 compliant memory devices only.
The following USB memory devices are not supported:
- A USB memory device with multiple media partitions that require other utilities to
access to the contents therein.
- A USB memory device connected via an external hub.
z
Multiple USB memory devices cannot be used simultaneously. A USB memory
device and the Memory Card Reader also cannot be used simultaneously.
z
The machine does not display a menu to prevent you from removing a USB memory
device while it is being accessed.
îš„Meter Counts for 2 Sided Printing
z
When printing 2 sided, depending on the application being used, blank sheets can
be inserted automatically to adjust pages. These blank sheets inserted by the
application also are counted by the meter.
îš„Meter Count for Watermark
When the Copy Management Expansion Kit (optional) is installed and a document is
printed using the Watermark feature (such as Annotation and Force Annotation), the
meters count with the following method:
z
Color documents are counted as color copies regardless of whether the Watermark
feature is used or not.
z
Black & white documents are counted as color copies if [Font Color] is set to other
than [Black], or counted as black & white if [Font Color] is set to [Black].
îš„Memory Card Reader
The Memory Card Reader (optional) supports the following media:
z
CompactFlash
To Next Page
Loading...
Need help?
General
