15 Appendix
572
Appendix
15
îš„Using Network Scan Driver and Stored File Manager 3 Simultaneously
You cannot use both the Network Scan Driver and Stored File Manager 3 on a single
computer to connect to the machine.
A maximum of three computers using either the Network Scan Driver or Stored File
Manager 3 may retrieve files simultaneously from one machine.
îš„Using TIFF Files
The TIFF files created by Stored File Manager 3 are compressed into the MMR, MH,
JBIG, or JPEG format. To open a TIFF file, use application software that supports the
format.
îš„Restriction on Scanning Capacity
The maximum scanning capacity for one page is 297 x 432 mm. For standard sizes,
A3 or 11 x 17 inches.
îš„Number of Sheets for Scanning (for Folder)
A maximum of 999 pages can be scanned for folders at one time. The number of pages
may differ depending on the file size and resolution.
îš„Store to USB
z
The Scanner Kit and the Scan to USB Kit are required to use this service.
z
You cannot use this service on job flows (whose Target is Scan Jobs or Folder).
z
The USB 2.0 compliant memory device is supported.
z
Unlike a dialog box in a computer, no message appears when you insert a USB
memory device into the machine. Neither file nor directory names in a USB memory
device are displayed on the touch screen.
z
You cannot delete the files or folders in a USB memory device using the machine.
z
To prevent you from removing a USB memory device while it is being accessed, an
icon showing that the removal of a USB memory device is prohibited appears on the
touch screen. Be sure to remove a USB memory device from the machine after the
message "Data has been transferred." is displayed on the touch screen.
z
When the data size exceeds the capacity of the USB memory device while the
machine is performing the Store to USB service, the job in progress is cancelled.
z
Neither the Media Print - Text nor Media Print - Photos feature can be used while the
Store to USB service is in progress. The Store to USB service cannot be used as well
while the Media Print - Text or Media Print - Photos feature is in progress.
z
You can enable or disable the Store to USB service from CentreWare Internet
Services in the System Administration mode. You cannot set it from the touch
screen. (The default setting is [Enabled].)
z
You can set not to display the [Store to USB] service on the [Services Home] screen
from the touch screen.
z
You can use a commercially available memory card reader that is single-slot type to
save data, but the operation is not guaranteed. When you use a multi-slot memory
card reader, only one of those slots can be recognized.
z
The machine may not be able to recognize a USB memory device that was formatted
by a digital camera or a tool other than the Windows standard format tool.
To Next Page
Loading...
Need help?
General
