Replacing Consumables
57
Maintenance
3
1 Make sure that the machine is not operating,
and open the front cover.
2 Put your hand under the dent of the toner
cartridge indicated in the message, and
slightly lift up the cartridge.
Note • "Y", "M", "C", or "K" indicates Yellow,
Magenta, Cyan, and Black, respectively.
3 Pull out the toner cartridge slowly, and slide
it out.
Important • Slide out the toner cartridge gently. Otherwise, toner may spill from the cartridge.
• If you have a used toner cartridge which is no longer needed, contact our Customer Support
Center for its disposal.
4 Take the new toner cartridge of the same
color out of the box, and shake the cartridge
up and down and left and right for ten times.
5 Hold the cartridge with the arrow facing up,
and push the cartridge in slowly until it stops.
WARNING
Never throw a toner cartridge into an open
flame. Remaining toner in the cartridge
may catch fire and cause burn injuries or
explosion.
If you have a used toner cartridge no
longer needed, contact your local Fuji
Xerox representative for its disposal.
To Next Page
Loading...
