Print Quality
10-24
Determining Values
From the lines to the right of the Y (yellow), M (magenta), and C (cyan) pattern, find the values of the
straightest lines.
When “0” is the value nearest the straightest line, you do not need to adjust the color registration. When the
value is not “0”, follow the procedure outlined in “Entering Values”.
Note: You can also use the densest colors of the grid to find the straightest lines. The colors printed at the
highest density are those next to the straightest lines.
Entering Values
Using the control panel, enter the values that you found in the Color Registration Correction Chart to make
adjustments.
1. Press the System button to display the
Setup screen.
2. Press the Up Arrow or Down Arrow button until
Admin Menu appears, and then press the OK
button.
3. Press the Up Arrow or Down Arrow button until
Maintenance appears, and then press the OK
button.
4. Press the Up Arrow or Down Arrow button until
Adjust Color Regi appears, and then press the OK
button.
5. Press the Up Arrow or Down Arrow button until
Color Regi appears, and then press the OK button.
6. Select
Yellow, Magenta, or Cyan, and then press the OK button.
7. Press the Up Arrow or Down Arrow button until you reach the value displayed on the chart.
8. Press the OK button, and move the cursor to the next value.
9. Repeat steps 6, 7, and 8 to continue adjusting the color registration.
10. Press the Exit button, and then select
Color Regi Chart, and then press the OK button.
11. Press the OK button again.
The Color Registration Correction Chart is printed with the new values.
12. Color registration adjustment is complete when the straightest Y (yellow), M (magenta), and C (cyan)
lines are next to the “0” line.
If “0” is not next to the straightest lines, determine the values and adjust again.
Note: After printing the Color Registration Correction Chart, do not turn off the printer until the printer
motor has stopped running.
To Next Page
Loading...
Need help?
General
