Print Quality
10-25
Enabling/Disabling Automatic Color Registration
Use the following procedure to enable/disable automatic color registration when a new print cartridge is
installed.
1. Press the System button to display the
Setup screen.
2. Press the Up Arrow or Down Arrow button until
Admin Menu appears, and then press the OK
button.
3. Press the Up Arrow or Down Arrow button until
Maintenance appears, and then press the OK
button.
4. Press the Up Arrow or Down Arrow button until
Auto Regi Adjust appears, and then press the OK
button.
5. Press the Up Arrow or Down Arrow button to turn automatic color registration
On or Off, and then
press the OK button.
To Next Page
Loading...
