Control Panel Error Messages
10-35
NNN indicates a numeric value.
Scanner Lamp Error
Error 062-371
Restart Printer
The scan bar lock switch is set to the locked position.
Set the scan bar lock switch to the unlocked position, and then turn the
printer off and then on.
Note: When the printer tries to activate the scan bar when it is locked, it
produces a loud noise.
XXX Error
Error NNN-NNN
Press OK
A system error has occurred.
Press the OK button to clear the message.
Ready
Tray 2 is Missing
Tray xxxx is pulled out.
Set Tray xxxx into the correct position. xxx indicates the number of the tray.
Load Tray XXX
The correct paper is not set in Tray xxxx.
Set the following size, direction, and type of paper into the tray: XXXX. xxx
indicates the number of the tray or Tray 1 (MPT). See Loading Paper in
Trays 2 and 3 on page 5-12.
Message Condition/Reason/Action
To Next Page
Loading...
