Control Panel Error Messages
10-34
Hard Drive Full
Error 016-982
Press OK
RAM disk memory is full and cannot continue processing the current print
job.
Press the OK button to clear the message, cancel the current print job, and
conduct the next print job, if any.
Press the Stop button to cancel the print job.
Press the Forward Arrow button to open the
Walk-Up Features menu
and delete the current job.
To avoid this error in the future, do the following:
Reduce the number of print pages, such as splitting the print data.
Increase free memory space by deleting unnecessary data in the RAM
disk.
Printer Too Hot
Error 042-700
Cooling down
Please Wait...
The printer’s internal temperature is too high.
Processing on the printer has been slowed down. When the internal
temperature falls, the processing speed will automatically increase.
Ready
Non-Genuine Toner
Installed
Error 193-700
The printer is in the custom toner mode.
Though some of the print cartridges reach the end of their lives, you can
continue printing.
XXX Error
Error NNN-NNN
Restart Printer
Error NNN-NNN relates to printer problems.
Turn the printer off and then on. If the error continues, contact Fuji Xerox
local Representative Office or Authorised Dealers.
Restart Printer
116-NNN
Error 116-NNN relates to printer problems.
Turn the printer off and then on. If the error continues, contact Fuji Xerox
local Representative Office or Authorised Dealers.
Restart Printer
118-NNN
The Network Expansion Card (optional) is not installed correctly or is not
working correctly due to damage or malfunction.
Reinstall the Network Expansion Card.
550 Feeder Error
Error 072-215
Restart Printer
The 550-Sheet Feeder with Cabinet (optional) is not installed correctly or is
not working correctly due to damage or malfunction.
Reinstall the sheet feeder.
Duplexer Error
Error 077-215
Restart Printer
The Duplex Unit is not installed correctly or is not working correctly due to
damage or malfunction.
Reinstall the Duplex Unit.
RAM Error
Error 116-316
Restart Printer
Additional memory is not installed correctly or is not working correctly due
to damage or malfunction.
Reinstall the additional memory.
RAM Error
Error 116-320
Restart Printer
An unsupported additional memory (optional) is installed.
Replace the specified additional memory.
NV RAM Error
Error 116-390
Restart Printer
An internal error has occurred.
Restart the printer. If the problem persists, contact Fuji Xerox local
Representative Office or Authorised Dealers.
Message Condition/Reason/Action
To Next Page
Loading...
