Fuji Xerox DocuPrint CM215 series User Manual

Printing Basics 135
• If envelopes are still not fed correctly, add some bending to the flap of the envelopes as shown in the following
illustration.
The amount of the bending shall be 5 mm (0.20 inches) or less.
• To confirm the correct orientation of envelopes, see the instruction on the Envelope/Paper Setup Navigator on
the print driver.

Fuji Xerox DocuPrint CM215 series Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CM215 series
Category	Printer
Language	English