Using the Operator Panel Menus and Keypad 329
• Margin Middle
Purpose:
To specify the value of the middle margin.
Values:
Scan Defaults
Use the Scan Defaults menus to configure a variety of scanner features.
NOTE:
• Asterisk (*) is the factory default setting.
• Scan to Network (DocuPrint CM215 f/CM215 fw Only)
Purpose:
To store the scanned image on a network server or on a computer.
Values:
• File Format
Purpose:
To specify the file format to save the scanned image.
Values:
•Color
Purpose:
To set the color mode.
Values:
0mm*/0.0 inch* Specify the value in increments of 1 mm/0.1 inch.
0-50mm/0.0-2.0 inch
Computer(Network)* Stores the scanned image on a computer using the Server Message
Block (SMB) protocol.
Server(FTP) Stores the scanned image on a server using the FTP protocol.
PDF*
TIFF
JPEG
Black & White Scans in black and white mode. This is available only when File
Format is set to PDF or TIFF.
Color* Scans in color mode.
To Next Page
Loading...
