334 Using the Operator Panel Menus and Keypad
• Delayed Start
Purpose:
This feature enables you to set a specific time for the fax transmission to start. Once Delayed Start
mode is activated, your printer stores all of the documents to be faxed into its memory and sends them
at the specified time. After faxing in the Delayed Start mode is complete, the data in the memory is
cleared.
Values:
NOTE:
• A maximum of 19 delayed fax jobs can be stored in this printer.
Print from USB Defaults
• Layout
Purpose:
To fit print image automatically to one sheet of paper.
Values:
21:00*/PM9:00* Specify the fax transmission start time when sending a fax at a
specified time.
0:00 - 23:59 / AM/PM1:00
- 12:59
Auto*
Off
To Next Page
Loading...
