Fuji Xerox DocuPrint CM215 series

Scanning 233
 Changing the Scan Settings for an Individual Job
Scanning to a Computer
• For the DocuPrint CM215 f/CM215 fw
1 Press the (Scan) button.
2 Select Scan to Network, and then press the button.
3 Select Scan to, and then press the button.
4 Select Computer (Network), and then press the button.
5 Select the destination computer, and then press the button.
6 Select the desired setting or enter the value using the numeric keypad, and then press the
button.
7 Repeat steps 5 and 6 as needed.
8 Press the (Start) button to begin the scan.
• For the DocuPrint CM215 b
1 Press the (Scan) button.
2 Select Scan to Computer(USB), and then press the button.
3 Select the destination computer, and then press the button.
4 Select the desired menu item, and then press the button.
5 Select the desired setting or enter the value using the numeric keypad and then press the
button.
6 Repeat steps 4 and 5 as needed.
7 Press the (Start) button to begin the scan.