Copying 175
Lighter/Darker
Adjust density level to create lighter or darker copy of original document.
1 For the DocuPrint CM215 f/CM215 fw, firstly load the top edge of document(s) with facing up into
the ADF or place a single document facing down on the document glass and close the document
cover.
For the DocuPrint CM215 b, place a single document facing down on the document glass, and
close the document cover.
See also:
• "Making Copies From the ADF (DocuPrint CM215 f/CM215 fw Only)" on page 166
• "Making Copies From the Document Glass" on page 164
2 Press the (Copy) button.
3 Select Lighter/Darker, and then press the button.
4 Select the desired settings, and then press the button.
NOTE:
• Asterisk (*) is the factory default setting.
5 If necessary, customize the copy settings such as the number of copies, copy size, and image
quality.
See also:
• "Setting Copy Options" on page 167
6 Press the (Start) button to begin copying.
Lighter2 Makes the copy lighter than the original. Works well with dark print.
Lighter1
Normal* Works well with standard type or printed documents.
Darker1 Makes the copy darker than the original. Works well with light print or
faint pencil markings.
Darker2
To Next Page
Loading...
