Faxing (DocuPrint CM215 f/CM215 fw Only) 291
•Prefix Dial
NOTE:
• Prefix Dial only supports the environment where you send a fax to the external line number. To use
Prefix Dial, you must do the following from the operator panel.
1 Press the (System) button.
2 Select Admin Menu, and then press the button.
3 Select Fax Settings, and then press the button.
4 Select Line Type, and then press the button.
5 Select PBX, and then press the button.
6 Press the (Back) button to return to the previous menu.
7 Select Prefix Dial, and then press the button.
8 Select On, and then press the button.
9 Press the (Back) button to return to the previous menu.
10 Select Prefix Dial Num, and then press the button.
11 Enter an up-to-five-digit prefix number from 0–9, *, and #.
12 Press the button when the prefix dial number on the LCD panel is correct.
13 Reboot the printer by turning the power switch off and then on.
To Next Page
Loading...
Need help?
General
