356 Troubleshooting
Clearing Paper Jams From the Rear of the Printer
IMPORTANT:
• To prevent electric shock, always turn off the printer and disconnect the power cord from the grounded outlet
before performing maintenance.
• To avoid burns, do not clear paper jams immediately after printing. The fusing unit becomes extremely hot
during use.
NOTE:
• To resolve the error displayed on the LCD panel, you must clear all print media from the print media path.
1 Push the rear cover handle and open the rear cover.
2 Lift up the levers.
3 Remove any paper jammed from the rear of the printer by carefully pulling it in the direction of the
arrow shown in the following illustration.
To Next Page
Loading...
