Fuji Xerox DocuPrint CM215 series - Admin Menu; Speed Dial; Group Dial

Using the Operator Panel Menus and Keypad 299
 Admin Menu
Use Admin Menu to configure a variety of printer features.
NOTE:
• A password is required to enter the Admin Menu menu when Panel Lock Set is set to Enable. In this
case, enter the password you specified, and press the button.
Phone Book (DocuPrint CM215 f/CM215 fw Only)
Use the Phone Book menu to configure the speed dial and group dial settings.
• Speed Dial
Purpose:
To store up to 99 frequently dialed numbers in speed dial locations.
NOTE:
• The first eight entries are assigned to the one-touch buttons on the operator panel.
See also:
• "Storing a Number for Speed Dialing" on page 273
• Group Dial
Purpose:
To create a group of fax destinations and register it under a 2-digit dial code. Up to 6 group dial codes
can be registered.
See also:
• "Setting Group Dial" on page 276
Network (DocuPrint CM215 f/CM215 fw Only)
Use the Network menu to change the printer settings affecting jobs sent to the printer through the
network.
NOTE:
• Asterisk (*) is the factory default setting.