Fuji Xerox DocuPrint CM215 series

Using the Operator Panel Menus and Keypad 325
 Defaults Settings
Use the Defaults Settings menu to configure the default copy, scan, and fax settings of the
printer. (The fax feature is available only on the DocuPrint CM215 f/CM215 fw.)
Copy Defaults
Use the Copy Defaults menus to configure a variety of copy features.
NOTE:
• Asterisk (*) is the factory default setting.
•Color
Purpose:
To set whether to make copies in color or in black and white.
Values:
•Collated
Purpose:
To sort the copy job.
Values:
Black & White Prints in black and white mode.
Color* Prints in color mode.
Uncollated* Does not sort the copy job.
Collated Sorts the copy job.