66 Printer Connection and Software Installation
Overview of Printer Connection and Software
Installation
Read this section to know the overall steps required for each connection method to complete the
printer connection and software installation.
Select one of the following connection methods.
• USB connection
• Ethernet connection (DocuPrint CM215 f/CM215 fw only)
• Wireless connection (DocuPrint CM215 fw only)
NOTE:
• If the Software Pack CD-ROM is not available, you can download the latest driver from our Web Site:
http://www.fujixeroxprinters.com/
îš„ USB Connection
• For Windows
1 Connect the printer and the computer with the USB cable.
Refer to "USB Connection" on page 71
.
2 Install the driver software on the computer from the Software Pack CD-ROM.
Refer to "Using Installer to Set Up Connection and Install Software" on page 88
.
• For Mac OS X
1 Connect the printer and the computer with the USB cable.
Refer to "USB Connection" on page 71
.
2 Install the driver software on the computer from the Software Pack CD-ROM.
Refer to "Configuring Printer and Installing Software on Mac OS X" on page 107
.
To Next Page
Loading...
Need help?
General
