Basic Operation 51
Turning On the Printer
IMPORTANT:
• Do not use extension cords or power strips.
• The printer should not be connected to an uninterruptible power supply (UPS) system.
1 Connect the power cord to the power connector on the rear of your printer (see "Rear View" on
page 46).
2 Connect the other end of the cord to the power source.
3 Turn on the printer.
NOTE:
• When you turn on the printer for the first time, follow the on-screen instructions on the LCD panel to
configure the initial settings of your printer.
See also:
• "Setting Initial Settings on the Operator Panel" on page 52
To Next Page
Loading...
Need help?
General
