326 Using the Operator Panel Menus and Keypad
• Reduce/Enlarge
Purpose:
To set the default value for copy reduction/enlargement ratio.
Values:
mm systems
inch systems
NOTE:
• You can also use the numeric keypad to input the desired zoom ratio from 25% to 400%, or press the
button to enlarge the zoom ratio or press the button to reduce the zoom ratio in 1% intervals.
• This item is available only when N-Up is set to Off or Manual.
• Document Size
Purpose:
To specify the default document size.
Values:
200%
A5→A4(141%)
A5→B5(122%)
100%*
B5→A5(81%)
A4→A5(70%)
50%
200%
Stmt→Lgl(154%)
Stmt→Ltr(129%)
100%*
Lgl→Ltr (78%)
Ldgr→Ltr(64%)
50%
A4 (210 × 297mm)*
A5 (148 × 210mm)
B5 (182 × 257mm)
Letter (8.5 × 11")
Folio (8.5 × 13")
(DocuPrint CM215 f/CM215 fw only)
Legal (8.5 × 14")
(DocuPrint CM215 f/CM215 fw only)
Executive (7.25 × 10.5")
To Next Page
Loading...
