234 Scanning
Emailing the Scanned Image (DocuPrint CM215 f/CM215 fw Only)
To temporarily change a scan setting when emailing the scanned image:
1 Press the (Scan) button.
2 Select Scan to E-Mail, and then press the button.
3 Select the e-mail destination, and then press the button.
4 Select the desired menu item, and then press the button.
5 Select the desired setting or enter the value using the numeric keypad, and then press the
button.
6 Repeat steps 4 and 5, as needed.
7 Press the (Start) button to begin the scan.