Fuji Xerox DocuPrint CM215 series User Manual

154 Printing Basics
Printing on Custom Size Paper
Use the following procedures to print using either the Windows or Mac OS X print drivers.
• Using the Windows Print Driver
This section explains the procedure using Windows 7 as an example.
NOTE:
• The way to display the printer Properties/Printing Preferences dialog box differs according to the application
software. Refer to the manual of your respective application software.
1 From the application menu, select Print.
2 Select your printer and click Preferences.
3 Select the Paper/Output tab.
4 Select the size of the document to be printed from Paper Size.
5 Select the paper type to be used from Paper Type.
6 Click the Layout tab.
7 From Output Size, select the custom size you defined. If you have selected the custom size from
Paper Size in step 4, select Same as Paper Size.
8 Click OK.
9 Click Print in the Print dialog box to start printing.
• Using the Mac OS X Print Driver
This section explains the procedure using Mac OS X 10.8 Tex tEdi t as an example.
1 From the File menu, select Page Setup.
2 Select your printer from Format For.
3 From Paper Size, select Manage Custom Sizes.
4 In the Custom Paper Sizes window, click +.
A newly created setting "Untitled" is displayed in the list.
5 Double-click "Untitled" and enter a name for the setting.
6 Enter the size of the document to be printed in the Width and Height boxes of Paper Size.
7 Specify Non-Printable Area if necessary.
8 Click OK.
9 Make sure that the newly created paper size is chosen in Paper Size, and then click OK.
10 From the File menu, select Print.
11 Click Print to start printing.

Fuji Xerox DocuPrint CM215 series Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CM215 series
Category	Printer
Language	English