Scanning 221
After you configured settings, go to "Sending the Scanned File to the Network" on page 225.
3 Host Address (IP
Address or DNS Name)
Enter a server name or IP address of your computer or the FTP
server that you have shared out.
The following are examples:
• For Server FTP:
Server name: myhost.example.com
(myhost: host name, example.com: domain name)
IP address: 192.168.1.100
• For Computer SMB:
Server name: myhost
IP address: 192.168.1.100
4 Port Number Enter the server port number. If you are unsure, you can enter the
default value of 21 for FTP and 139 for SMB.
5 Login Name (if required
by host)
Enter the user account name that has access to the shared folder on
your computer or FTP server.
6 Login Password Enter the password corresponding to the above login name.
NOTE:
• Empty password is not valid in the Scan to Computer feature.
Make sure that you have a valid password for the user login
account. (See "Confirming a Login name and Password" on
page 201 for details on how to add a password in your user login
account.)
7 Re-enter Password Re-enter your password.
8 Name of Shared
Directory
For Computer SMB only.
On the Windows operating system, enter the share name of the folder
to store the scanned document on the recipient computer.
On the Mac OS, enter the folder name to store the scanned document
on the recipient computer.
9 Subdirectory Path
(optional)
For Computer SMB
To store the scanned document in the share folder directly without
creating any subfolder, leave the space blank.
To store the scanned document in the folder you created under the
share folder, enter the path as following.
Example: Share Folder name: MyShare, Second-level folder name:
MyPic, Third-level folder name: John
You should now see MyShare\Mypic\John in your directory.
In this case, enter the following item.
Server Path: \MyPic\John
For Server FTP
Enter the server path to store the scanned document.
MyShare (Share folder)
MyPic
John
To Next Page
Loading...
Need help?
General
