Using the Operator Panel Menus and Keypad 331
• Sharpness
Purpose:
To set the default sharpness level.
Values:
• Auto Exposure
Purpose:
To suppress the background of the original to enhance text on the scanned image.
Values:
• Margin Top/Bottom
Purpose:
To specify the value of the top and bottom margins.
Values:
• Margin Left/Right
Purpose:
To specify the value of the left and right margins.
Values:
Darker1 Makes the scanned image darker than the original. Works well with
light print or faint pencil markings.
Darker2
Sharpest Makes the scanned image sharper than the original.
Sharper
Normal* Does not make the scanned image sharper or softer than the original.
Softer Makes the scanned image softer than the original.
Softest
Off Does not suppress the background.
On* Suppresses the background of the original to enhance text on the
scanned image.
2mm*/0.1 inch* Specify the value in increments of 1 mm/0.1 inch.
0-50mm/0.0-2.0 inch
2mm*/0.1 inch* Specify the value in increments of 1 mm/0.1 inch.
0-50mm/0.0-2.0 inch
To Next Page
Loading...
