User Guide
102
*1
This message appears only when Fuji Xerox toner cartridge is used (The Non-Genuine mode is disabled).
*2
The remaining page yield differs depending on printing conditions, contents of the documents, and frequency of turning on/off the
printer. For more information, see "Supplies (P.99)."
• When placing a used toner cartridge on the floor or on a table, place a few sheets of paper under the toner cartridge to
catch any toner that may spill.
• Do not reuse old toner cartridges once you remove them from the printer. Doing so can impair print quality.
• Do not shake or pound the used toner cartridges. The remaining toner may spill.
• We recommend you to use up the toner cartridges within one year after removing them from the packaging.
• Black and white printing is available even when the printer has run out of color toners. However, replace the toner
cartridges as soon as you can.
Replacing the Toner Cartridge
• Make sure to remove all the paper from the bypass tray and close the bypass tray cover before removing the toner
cartridge.
1.
Grasp the grips on both sides of the front cover, and then pull it down to open.
2.
Grasp the handle on the toner cartridge that you want to replace, and then pull it out.
• Do not shake the used toner cartridge. Shaking the cartridge may cause the toner to spill out.
3.
Unpack a new toner cartridge of the desired color.
To Next Page
Loading...
Need help?
General
