7 Troubleshooting
155
7.2.5 Jam/Alignment Problems
• Some of the following procedures can be performed using the operator panel. For details about the settings, see
"Understanding the Printer Menus (P.43)."
Incorrect Margins on the Top and Side
Disorganized Color Registration
Problem Action
The top and side margins are
incorrect.
1 Adjust the paper guides properly.
If the problem persists, proceed to step 2.
2 Use any of the trays in place of the bypass tray.
If the problem persists, proceed to step 3.
3 Make sure that the margins are set correctly on the program being used.
If the problem persists, contact Fuji Xerox local representative office or an
authorized dealer.
Problem Action
Color registration is out of
alignment.
1 Change the paper type in the print driver.
If the problem persists, proceed to step 2.
2 Execute auto color registration adjustment.
• For details, see "[Adjust ColorRegi] (P.57)."
If the problem persists, contact Fuji Xerox local representative office or an
authorized dealer.
To Next Page
Loading...
Need help?
General
