User Guide
60
▌
[Tray Settings] >
[Tray2]
• This setting is available only when the optional 550-sheet feeder is installed.
Specifies the paper loaded in the optional 550-sheet feeder.
▌
[Tray Settings] >
[Tray Priority]
Sets the priority order of the paper trays for automatic tray selection. If paper trays loaded with the same paper
size and type exists, the paper tray is selected according to this priority order.
3.2.6 [Panel Language]
Use this menu to select the display language.
[Display Screen]
Specifies whether to display a popup message that prompts to set the paper
type and paper size when paper is loaded in tray1.
[Paper Size]
Specifies the paper size.
[Paper Type]
Specifies the paper type.
[Display Screen]
Specifies whether to display a popup message that prompts to set the paper
type and paper size when paper is loaded in the optional 550-sheet feeder.
To Next Page
Loading...
Need help?
General
