User Guide
80
4.1.3 Stored Print
When you send a job to the printer, you can specify in the print driver to store the job in the memory. When you
are ready to print the job, go to the printer and use the operator panel to identify which job in the memory you
want to print.
• The data in the memory is cleared when the printer is turned off.
• The stored print feature is available when:
- The RAM disk is enabled in the printer menu.
- [RAM Disk] is set to [Installed] in the print driver.
Overview
The stored print feature includes the following job types. Read each description to select optimum job type for
your print job.
Secure Print
You can temporarily store print jobs secured with a password in the memory. Only authorized users with
passwords can proceed the print job from the operator panel. This feature can be used to print confidential
documents. Before printing, you can select the menu to delete or store the data after you print it.
Sample Set
You can print a single copy to verify the print quality after a collated print job has been stored in the memory. If
the print quality is good as expected, you can choose to print more copies. This prevents large number of
misprinted copies.
Procedures for Printing Stored Jobs
• The stored print feature is not available when a print job is too large for the available memory.
• The stored print feature is available when using the Printer Control Language (PCL) driver, PostScript 3 Compatible driver,
or Fuji Xerox Common Print Driver.
Send confidential data.
Enter the password
from the operator
panel.
Print data.
Confidential
Print a single set.
Print the rest of sets.
To Next Page
Loading...
Need help?
General
