3 Using Your Printer
59
▌
[Administrator Menu] >
[Secure Settings]
Use this menu to configure the security settings, such as limiting access to the menus. This prevents the printer
settings from being changed accidentally.
▌
[Administrator Menu] > [Secure Settings] >
[Panel Lock]
Specifies whether to limit access to the menus with a password, and to change the password.
*
This setting is available only when [Panel Lock Set] is enabled.
▌
[Administrator Menu] > [Secure Settings] >
[Login Error]
• This setting is available only when [Panel Lock Set] is enabled. For details about this setting, see "[Panel Lock] (P.59)."
Specifies whether to specify the number of error entry attempts allowed when you log in the menus protected
by [Panel Lock].
3.2.5 [Tray Settings]
Use this menu to define the print media loaded in tray1, the bypass tray, and the optional 550-sheet feeder.
Refer
• For details about supported paper sizes and types, see "Supported Print Media (P.64)."
▌
[Tray Settings] >
[Bypass Tray]
Specifies the paper loaded in the bypass tray.
*
This setting is available only when [Panel Specified] is enabled.
▌
[Tray Settings] >
[Tray1]
Specifies the paper loaded in tray1.
[Panel Lock Set]
Sets password protection for the following menus:
• [Administrator Menu]
• [Report / List]
[Change Password]
*
Changes the four-digit password required to access the menus.
[Paper Size]*
Specifies the paper size.
[Paper Type]*
Specifies the paper type.
[Bypass Tray Mode] [Panel Specified]
Uses the paper size and type specified on the operator panel.
[Driver Specified]
Uses the paper size and type specified on the print driver.
[Display Screen]*
Specifies whether to display a popup message that prompts to
set paper type and paper size when paper is loaded in the
bypass tray.
[Paper Size]
Specifies the paper size.
[Paper Type]
Specifies the paper type.
To Next Page
Loading...
Need help?
General
