User Guide
120
6.6 Removing the Wireless LAN Adapter
and Optional Accessories
• If you change the printer location, or if you ship the printer and the optional accessories to a new location, you must
remove the wireless LAN adapter, the optional 550-sheet feeder, and the cabinet from the printer. For shipping, pack
them securely and safely to avoid damage.
6.6.1 Removing the Optional 550-Sheet Feeder
1.
Make sure that the printer is turned off, and then disconnect all cables from the rear of the printer.
2.
Slide the lock switch of the optional 550-sheet feeder to the unlock position.
3.
Gently lift the printer off the optional 550-sheet feeder, and then place it on a level surface.
• Two people are required to lift the printer.
4.
Connect all the cables into the rear of the printer, and then turn on the printer.
To Next Page
Loading...
Need help?
General
